Receptor SDR DDC.
Diseño miniatura. Interfaz USB que permite contectarlo a cualquier PC, portátil, tablet y otros...
14-bit ADC, ~110 dB BDR y hasta 3 MHz de ancho de banda.
Advertencia: ¡Últimos artículos en inventario!
The ColibriNANO opens new horizons for HF band enthusiasts, thanks to its 14-bit ADC, which provides a ~110 dB BDR and up to 3 MHz sample rate. A 0.5 ppm local oscillator gives the ColibriNANO a great frequency stability. Using the ColibriNANO remotely, in some rural area will give you the lowest air noise you've ever seen while won't rob you from any comfort or functionality. The ColibriNANO operated by our own ExpertSDR2 software and compatible with popular HAM software such as HDSDR, SDRSharp via the ExtIO library.
ColibriNANO block diagram
Minimum hardware requirements
Compatible HAM software
Expert Electronics company developed the ExpertSDR2 software to control HAM radio equipment of its own design. Software version for the ColibriNANO allows you to harness all the potential of the receiver: remote operation, synchronization with the transceiver, IQ channel bandwidth up to 3 MHz, control of the preamplifier and LPF.
Appearance of the ExpertSDR2 software
Remote operation with the ColibriNANO receiver
To control the ColibriNANO via Internet we created the ExpertRemote system, based on the client-server connection. This system allows you to place the receiver and server in the remote location with low air noise and Internet connection. This might be some remote village or place with no electrical interference and 3G/4G Internet (or any other connection type). Using the ExpertRemote system you can enjoy clear air from your phone, tablet, notebook or PC. Even simple antennas, placed in a "quiet" place, allows you to listen to the far stations with low level.
Another feature of this system is that the receiver's software can be synchronized with transceivers and be used as the panorama adapter with high resolution. Use the transceiver to transmit signals, receive on your remotely located receiver via the ExpertRemote system.
Distant stations, rare (DX) stations or expeditions from now on will be a reality for you with our ExpertRemote system!
ExpertRemote system block-diagram
*ColibriNANO Remote Server for Windows PC will be available in October.
|Receiving bandwidth, MHz||0.01 - 55|
|Receiving bandwidth in the oversampling mode, MHz||0.01– 500|
|Noise floor, dBm||
1.9 MHz (160M) - 131
|Sample rate with IQ stream resolution 24-bit, kHz||48, 96, 192, 384, 768|
|Sample rate with IQ stream resolution 16-bit, kHz||1536, 1920, 2560, 3072|
|Amount of software receivers||2|
|Blocking Dynamic Range (BDR), dB||110|
|IMD3 Dynamic Range, dB||95|
|Supply voltage range, V||4.5...5.5|
|Maximum antenna input voltage, without ADC overload, mV (ATT=0 dB)||74 (Pk-Pk); 32.7 (RMS)|
|Maximum current consumption, A||0.41|
|Input impedance, Ohm||50|
|ADC clock frequency, MHz||122.88|
|ADC resolution, bit||14|
|Local oscillator stability, ppm||+/- 0.5|
|Local attenuator with 0.5 dB step, dB||from -31.5 up to +6|
|RF input with up to 15 kV ESD protection||SMA connector|
|Dimensions W x H x L, mm||90х25х17|
|Operating temperature, °C||from -10 up to 60|
* - with a help of the external software can be supported a larger amount of modes
No hay reseñas de clientes en este momento.