¡Oferta! MB1 SDR Transceiver Ver más grande

MB1 SDR Transceiver + ATU

Nuevo producto

El MB1 es el futuro de la radioafición, es un transceptor SDR Standalone con DUC/DDC de conversión directa. Cubre las bandas de HF/6M/VHF.

Modelo con acoplador de antenas incoporado

Más detalles

RESERVA YA, SIGUIENTE REMESA EN OCTUBRE

5 990,00 € IVA inc.

-280,00 €

6 270,00 € IVA inc.

  • Depósito de Reserva: 549 Euros
  • Pago Completo

Más

MB1 transceiver - is a new trend in amateur radio. This is a transceiver and a computer in a single package. It combines a classic design, developed for several decades, with the most advanced DUC/DDC SDR-technologies - Direct Digital Conversion (DDC) and Digital Up Conversion (DUC), and full-featured modern personal computer with an Intel Core i5 processor on board.
The operator gets a full-featured workstation in a single package, which can be switched on by pressing one button.

  • Two independent receive channels with bandwidth 312 kHz

  • Broadband overview of up to 80 MHz
  • High quality IPS 7" display with resolution 1280x800
  • ExpertSDR2 software in two versions: for Desktop and for integrated display GUI
  • Opportunity to install any other software (applicable for Windows 10 OS) by the User
  • Record air fragments (IQ files) with bandwidth up to 312 kHz and an opportunity to play it later

Features of the transceiver

  • Independent receive path with Digital Direct Conversion (DDC)

  • Separate independent transmission path, constructed on the basis of Digital Up Conversion (DUC)
  • Full duplex or half duplex modes*
  • Two independent receivers with panorama's bandwidth up to 312 kHz and two sub-receivers in each of them
  • 4 HF antenna connectors and 2 VHF
  • Four programmable PTT output for external power amplifiers
  • Ability to connect the VHF transverters
  • Using the transceiver as a measuring receiver
  • Using the transceiver as a generator (DAC OUT)
  • Minor manipulation delay in CW mode (about 10 ms)
  • Ability to work with the transceiver in SO2R mode
  • Remote control mode

* Full-duplex mode is supported by the transceiver's hardware, but is not implemented in the firmware and software yet. This mode will be implemented in future versions of ExpertSDR2 software

 

PC capabilities of your transceiver

  • Installing of digital modes software

  • HAM and contest logs
  • Use of two CW Skimmers on different bands
  • Connecting the transceiver to the local network and the Internet
  • Using of the Internet applications (e-mail, Skype, ICQ, TV, etc.)
  • Play video and audio files
  • Watch TV via the USB-receivers
  • Ability to connect two external displays, keyboard and mouse


Internal PC's parameters 

  • Mother board of thin Mini-ITX Form Factor
  • CPU Intel Core i5 3.0GHz
  • RAM 8GB
  • SSD disk drive, 128GB
  • 4 ports USB3.0 on the rear panel and 2 ports USB 2.0 on the front panel of the receiver
  • HDMI and DPORT for connecting external monitors
  • LAN connector 1Gb
  • COM-port

 
Application area 

  • Full-function radio amateur transceiver
  • Mobile contest-station
  • Remote receipt point for the contests and other applications
  • Spectrum analyzer with the bandwidth up to 80MHz
  • Work with the external programs of digital connection types, CW skimmer, etc.


Block scheme

MB1 2

Software

A version of ExpertSDR2 software with adapted GUI for 7" display was specially developed for the MB1 transceiver. At the present time software works in RX/TX mode and supports two independent receiving channels with the bandwidth up to 312 kHz. A DSP library developed by company Expert Electronics allowed to improve receiving quality and higher the stability of the software. Two OS are supported: Windows 8 and Linux Ubuntu.


MB1 supplied accessories

The transceiver may have an additional option: Automatic Tuner Unit (ATU) for impedance matching antennas with 50 ohm output path of the transceiver.

Basic configuration:

  • MB1 transceiver

Note: ATU is not installed in the transceiver

  • Dynamic microphone MD15

  • Power supply cable to connect the transceiver to an AC network
  • Two JACK 6.3 to JACK 3.5 audio adapters for connecting the headset to the transceiver

Maximum configuration:

  • MB1 transceiver+ATU

Note: ATU is installed in the transceiver

  • Dynamic microphone MD15
  • Power supply cable to connect the transceiver to an AC network
  • Two JACK 6.3 to JACK 3.5 audio adapters for connecting the headset to the transceiver
Characteristic Value
Receiver  
Design concept of the receive path Direct Digital Conversion
RF ADC clock frequency, MHz 160
RF ADC resolution, bit 16
RX frequency range, MHz 0.09 ... 65; 95 ... 148
The maximum width of the spectrum display, MHz 80
Amount of independent RX channels 2
Blocking Dynamic Range (BDR), dB 129...130
Dynamic Range over IMD3, dB 98
MDS level, dBm -124
Image channel rejection, dB > 110
Local oscillator stability, ppm +/- 0.5
Built-in preamplifier, dB -20, -10, 0, +10
Additional VHF preamplifier, dB +22
   
Transceiver  
The method of signal generation Digital Up Conversion
RF DAC clock frequency, MHz 640
RF DAC resolution, bit 14
The range of transmission frequencies, m 160, 80, 40, 30, 20, 17, 15, 12, 10, 6, 2
Maximum output power in HF, W 100
Maximum output power in VHF, W 50
   
Other characteristics  
Dimensions, mm 320x140x250
Weight, kg 10
Operating Temperature, degrees Celsius 0...+50
Power voltage range, V, Hz ~100 ... 240, 50 ... 60
Maximum consumption power, W 320

Reseñas

No hay reseñas de clientes en este momento.

Escribe tu opinión

MB1 SDR Transceiver + ATU

MB1 SDR Transceiver + ATU

El MB1 es el futuro de la radioafición, es un transceptor SDR Standalone con DUC/DDC de conversión directa. Cubre las bandas de HF/6M/VHF.

Modelo con acoplador de antenas incoporado